Hiki ke ʻōlelo ʻia ʻo ka welding kekahi o nā ʻenehana koʻikoʻi i ka nohona hou.I ko mākou ola i kēlā me kēia lā, mai nā mokulele, nā kaʻa kaʻa kiʻekiʻe, nā moku, nā kaʻa a me nā ala ʻē aʻe o ka lawe ʻana, i nā mea pāʻani, nā mea hana hale, nā meaʻai a me nā mea e pono ai i kēlā me kēia lā, aia ʻo Lingke ultrasonic welding.Hiki ke ʻōlelo ʻia ʻo Lingke ultrasonic welding ʻenehana ke hana pono i ka ʻoihana hana.

E hoʻohana ʻo Lingke Ultrasonic i nā ʻano kuʻi ʻokoʻa i ka wā e kū ana i nā huahana o nā mea like ʻole.Ma ke kahua o ka wiliwili plastik, aia 6 mau ʻano kuʻihao maʻamau.ʻo lākouwili ultrasonic, wiliwili pā wela,wiliwili ʻana, wiliwili alapine kiʻekiʻe, aweuweu hoohehee wela.A me nā mīkini hoʻopaʻa plastic, i kēia lā e nānā mākou i nā loina welding a me nā kahua kūpono o ʻekolu o lākou!

ʻO ke kani kani kani
ʻO ke kumumanaʻo o ka ultrasonic plastic welding ka hana ʻana i nā hōʻailona hawewe kiʻekiʻe kiʻekiʻe a me ke kiʻekiʻe mai kahi mea hana hōʻailona, ​​​​e hoʻohuli iā lākou i ka ikehu mechanical vibration kiʻekiʻe ma o ka transducer, a laila hoʻohui i nā hawewe i hoʻonui ʻia i nā ʻāpana plastik e welded. ma o ka kiwi akiwi wiliwili.Ma ka ʻaoʻao ʻē aʻe, ʻo ka friction kiʻekiʻe-frequency ma lalo o ke kaomi kiʻekiʻe e hoʻoheheʻe koke ai ka ʻili pili i ka plastik i ka wela kiʻekiʻe.Ma hope o ka pau ʻana o ka hawewe kani ultrasonic, hoʻopaʻa ʻia nā ʻāpana plastik ʻelua ma hope o kahi manawa pōkole o ke kaomi a me ka hoʻomaha.ʻAʻole ʻoi aku ka nui o ke kaʻina hana kuʻi ʻana ma mua o hoʻokahi kekona, a hiki ke kiʻekiʻe ka ikaika kuʻi ʻana e like me ke kino.

Hoʻohana: nylon, polyester, polypropylene, kekahi polyethylene, hoʻololi i ka resin acrylic, etc. Hoʻohana nui ʻia i nā ʻoihana like ʻole e like me nā mea uila, nā ʻāpana kaʻa, nā mea pāʻani plastik, nā mea hoʻonaninani, etc.

wiliwili pā wela
Hoʻomaʻamaʻa pololei ka pā wela metala i ka ʻili hoʻoheheʻe o nā ʻāpana plastik a hiki i kahi helu heheʻe.Puka ka pā wela, a laila hoʻopili i kekahi kaomi i nā ʻāpana plastik ʻelua i hui pū ʻia a hoʻomaha iā lākou e hoʻokō i ke kumu o ka wili.

He kūpono no: ʻO ka welding o ka thermoplastic plastic workpieces e like me PE, PP, nylon, ABS, acrylic, etc., e like me nā kukui hui ʻana o nā kaʻa, carburetors, nā pahu wai, nā apo kaulike mīkini holoi, nā bumpers, nā mea hoʻomaʻemaʻe a me nā ʻāpana plastik refractory ʻē aʻe. nā mea hana kūikawā nui-nui.

mīkini hoʻoheheʻe thermoplastic

wiliwili Rotary
I ka wā wili, hoʻopaʻa ʻia kekahi mea hana plastik a hoʻokele ʻia ka mea hana plastik ʻē aʻe e ke kaʻa e hoʻololi i ka wikiwiki kiʻekiʻe, e hoʻoheheʻe ʻia nā ʻili pili o nā mea hana plastik ʻelua a hoʻoheheʻe i ka wela wela.Ma hope o ka pau ʻana o ka hoʻololi ʻana, hoʻohana ʻia ke kaomi o waho e hoʻokele i nā ʻāpana i luna a i lalo.Paʻa nā mea hana i hoʻokahi, lilo i mea paʻa mau.

E pili ana i: PE, PP, nylon, PET a me nā paipu poʻe ʻē aʻe, nā mea kānana ʻenehana, nā mea kānana lapaʻau, nā kīʻaha plastik, nā pōpō pāʻani, nā hui hoʻoheheʻe wai, nā kīʻaha kānana aila kaʻa kaʻa, nā poʻo ʻauʻau, nā ʻōmole thermos a me nā mea hana ʻē aʻe.